Advanced Liquid Package Solution
With the wide application of heat shrink packaging machines in various industries, it is becoming more and more popular. Its packaging efficiency and high-end packaging technology are deeply loved by various industries. Therefore, the demand for heat shrink packaging machines is increasing. Therefore, how to choose the right heat shrink packaging machine is also very important! As the pioneer of heat shrink packaging machine, we teaches you how to choose the right heat shrink packaging machine for you!
Different models of shrink wrapping machines have different sizes of shrink furnaces, so you can choose the most suitable one after determining your own size.
Generally speaking, there are two types of packaging, one is fully enclosed and the other is cuff type. The closed type is all wrapped, such as milk or cosmetic boxes on a plate, and the cuff type is a small opening on both sides, which is generally used for beverages, mineral water, beer, etc. These two shrinking machines are different, so be sure to determine the packaging form of your items.
There are generally three kinds of packaging films, POF, PE, and PVC. Generally speaking, PE film is the thickest and is generally used in beverages. POF and PVC are generally used in cosmetics, gift boxes, mobile phone boxes and other items. The price of the PE film shrinking machine is relatively high, and the others are relatively cheap. The PE film shrinking machine can shrink other films, but it cannot be sent, because when the PE film shrinks other films, the temperature can be lowered and the speed can be accelerated. But in turn, not only affects the speed, the effect is not ideal.
The heating method of the shrinking machine is different, some are quartz tube heating, and some are steel pipe heating. The former is cheaper and the latter more expensive, but the quartz tube is a wearing part in the shrinking machine, and it is easier to damage, but the steel pipe is not easy to damage.
According to the different items to be shrunk, the load-bearing capacity of the shrinking machine is also different. Some are up to 20KG and some are 50KG. Therefore, you must pay attention to the problem of load-bearing when purchasing. If the load-bearing is too light, the service life of the machine will be greatly shortened, or even impossible to use, if it is too heavy, the cost will increase.
If you can, you can bring your own items to our factory for a test to see if the effect is ideal.
Of course, the specific situation is analyzed in detail, and the situation varies from person to person. Therefore, according to the industry you are in and the products to be packaged and the output, it is recommended to go to the manufacturer to inspect the entity to see if it can meet your own requirements!
